topblog Ivoire blogs

31/10/2013

Huawei 3WebCube B183 & B153 Setup Guide

Introduction

 

3WebCube is a new kind of router where you can quickly and easily get wireless internet in your home. From the appearance, you may never image it’s a router; it’s just like a home furnishings. All you need is an outlet - then you immediately online with both your PC/Mac, iPad and smartphone. You can take 3WebCube with you anywhere, without requiring installation, so you can be on the network when you are outside or in the home. The 3 WebCube is from the HUAWEI B183 and B153 Webcube. HUAWEI B183 supports maximum download speed to 21Mbps while HUAWEI B153 supports HSDPA download speed up to 7.2Mbps. Below are the user guide for 3 WebCube:  


Installation  

 

Setup is easy. Once you have connected your PC or Mac and open a browser the first time, the browser displays that you need to enter the PIN code for your SIM card. Of course, if your Webcube is unlocked, the PIN is unnecessary.  


Step 1:  Connect the router with power. Place it in a place with good signal strength, for example, beside a window.


Step 2:   Make sure you have enabled wireless internet on your computer. Enter the password that comes with 3WebCube, and you are now online.


Step 3:   Open a web browser and enter http://192.168.1.1 in the address field.


Step 4:  Login with “admin” in both the user name and password.


Step 5:   Press the gear next to Advanced Settings.


Step 6:   Press> 3G Network Settings and then:    


Select the following:

 

Status of PIN: Disable Enter PIN: <input PIN-kode> Click "Confirm"    

Change APN


Setup is easy. Once you have connected your PC or Mac and open a browser the first time, the browser displays that you need to enter the PIN code for your SIM card.  


Step 1:  Make sure you have enabled wireless internet on your computer. Enter the password that comes with 3WebCube, and you are now online.


Step 2:   Open a web browser and enter 192.168.1.1 in the address field


Step 3:  Login with admin in both the user name and password.


Step 4:    Press the gear next to Advanced Settings.


Step 5:   Press tab APN settings under> 3G Network Settings Profile Name: 3 Dial-up Number: *99 # User Name: <leave it blank> Password: < leave it blank > APN: bredband.tre.dk (1) IP Address: <Dynamic> Click on "Next".   (1) APN = Access Point Name Depending on which APN you choose, you have different visibility (IP address and ports available) compared to the rest of the Internet. Read more on 3.dk/apn-guide  


Changing the WiFi code  


To change the WiFi code on your 3WebCube, start by opening your internet browser - This uses Internet Explorer to show how to do.


Step 1: Enter "http://192.168.1.1" in the address field


Step 2: Login and enter "admin" into the password  


Step 3: Press the "Advanced Settings"  


Step 4: Press "Wi-Fi settings"


 Step 5: In the "WPA Pre-Shared Key", enter your new personal code and press "Save Settings"


2G / Edge Roaming

Setup is easy. Once you have connected your PC or Mac and open a browser the first time, the browser displays that you need to enter the PIN code for your SIM card.


Step 1: Make sure you have enabled wireless internet on your computer. Enter the password that comes with 3WebCube, and you are now online.


Step 2:  Open a web browser and enter 192.168.1.1 in the address field.


Step 3:  Login with admin in both the user name and password.


Step 4:  Press the gear next to Advanced Settings.


Step 5:  Press Tab mobile networks under> 3G Network Settings and select Manual.



Resetting 3WebCube


Setup is easy. Once you have connected your PC or Mac and open a browser the first time, the browser displays that you need to enter the PIN code for your SIM card.

Step 1: Make sure you have enabled wireless internet on your computer. Enter the password that comes with 3WebCube, and you are now online.

Step 2:   Open a web browser and enter 192.168.1.1 in the address field

Step 3:   Login with admin in both the user name and password.

Step 4:   Press the gear next to Advanced Settings.

Step 5:   Press tab Reset device under> unit maintenance. To reset it, press the Reset WebCube.   



Connectivity Problems


If you have connection problems or have forgotten your password or PIN, you can reset 3WebCuben. To do this:

1 Turn your 3WebCube

2 You can find the reset button (Reset) on the side of 3WebCube

3 Press and hold the reset button (Reset) for 5 seconds.

4 3WebCuben will automatically reboot.  


The default settings on 3WebCuben will now be restored. You can find your 3WebCube name (SSID) and your WiFi key inside 3WebCuben, where it is printed on the page.  

29/10/2013

HUAWEI LTE CPE B593 4G Router Installation and Firmware Upgrade

HUAWEI B593 4G LTE Router Installation--Quick guide to get online with 4G router   1)    You should start by inserting the SIM card and then plug the power adapter to the B593 4G router. SIM card must be inserted on the right side when looking at the front of the router. You can see how the SIM card slot in the LTE CPE B593. Power plug must be inserted behind the router.

 

2) Now you need to connect the router to your computer via wireless network (WiFi). You will find the router's name and network code on the sticker behind the router. WLAN - Name (SSID) is the router's name and WLAN - Key (WPA/WPA2) is the router's wireless network password. When you first connect the router via WiFi, it would be necessary to enter the WLAN key and get connected. If you experience problems connecting to the router with the information on the back of the router, this information may be changed. Press reset on the side of the router with a ball pen for about 20 seconds and try again.  

   

3) Once connected, open your Internet browser (eg Internet Explorer, chrome or Safari) and in the address bar, type the router's address http://192.168.1.1 . It’s the device website on the label.  

 

 

 

 

The default language is English, but you can choose your preferred language. Username is admin and password admin in lowercase. You can also find both the router's address and password on the sticker behind the router.  


4) The router will ask you to change the password when you login. You can ignore it. Your router is already secured with the unique network code that you entered earlier in order to connect to the router.  


5) Now select Setup Wizard in the left menu.   You must validate your PIN to the SIM card. You will find PIN 1 on the frame, you took the SIM card out of the scrape area. Then click Validate. Tick the Enable next to Save my PIN and press Next. Please note that the router stores the PIN code for the SIM card. Put a new SIM card in the router at a time; enter the PIN code for the new SIM card in the same way.  

 

But if you use unlocked B593 Router, it’s unnecessary to do this. 4GLTEMALL.com is selling the unlocked B593 Router.  

 

6) You do not need to change anything in the next section called Internet. Network mode is by default to Auto and Connection Mode to Always On. Please note that “LTE Only" means "4G Only" and "WCDMA only" means "3G only" in Network mode. You can try to isolate the signal to one of them if you wish. If you set it in Auto as recommended, the router will always try to use 4G as a primary connection. Press Next.  

   

7) You do not need to change anything in the next section called WLAN . If you want to call your router something other than WLAN1-xxxx , it's SSID , you need to change. We do not recommend that you do, and then you will always be able to find the router's name on the back of the router if you do not change it. Press Next.  

 

8) We do not recommend that you change the following in the next point WLAN Security. Network code field is WPA with pre-shared key. This code is already unique and you should only use it once when you connect to the router for the first time on your computer or your mobile. You will also be able to find the network code on the back of the router if you ever need it again later. If you want to change it anyway, you must enter a code on minimum 8 characters and press Next. Otherwise, press the Next without changing the information below.

       

9) Now press Submit and your router will reboot and you will be on the internet.  

 

10) Repeat point 2 for all devices to connect with the Internet.    


Color Codes  

Color Coding Mode on the front of the router

The purple color means that the router lacks the PIN. 

The blue color means that you are on 4G. 

The green color means that you are on 3G.

 

Firmware upgrade   --- Quick Guide for upgrade

1)  Download the latest HUAWEI B593u-12 firmware upgrade>  (. zip 26 Mb)      

2) Save the file to your desktop and unzip the file when you are finished.      

3) Open your browser and log into your router via 192.168.1.1

Username: admin

Password: admin (lower case)    

4) Select S ystem > Upgrade select tar.  

(The file you just extracted from the zip. file)> press Upgrade, then wait for few minutes, the system will auto upgrade the firmware of the HUAWEI B593u-12.          

 

These steps are also usable for HUAWEI B593s-22 and HUAWEI B593 other models, but the firmware varies.

28/10/2013

HUAWEI E352 High Speed USB internet Stick Review

The HUAWEI E352 high-speed modem will not only work well in Poland, but also on all the European countris. By supporting AWS frequency, we use it as well in the United States.  


Huawei E352 is a neat device. With typical appearance of a USB modem, user has a surprise for HUAWEI E352 USB dongle: it supports for AWS frequencies (1700MHz). Thanks to feature, E352 stick would work in the United States, where the standard of communication is very popular. On the market, it’s introduced to the operator T-Mobile. If you use it in United States, we guarantee that your computer will not be denied access to the Internet - no matter where we are.

 

  The build quality of Huawei E352 is satisfactory. The upper part is black and shiny, wrapped around a strip of aluminum color. This allows the device looks quite dignified and elegant. After removing the plugs from the back cover, we can see a SIM card slot and slot for microSD. The latter makes the modem will use as pen drive. What’s more, you will find another side with an external antenna jack that will catch stronger signal for users.    

 

HUAWEI E352 Specifications will meet the requirements from those who like fast Internet connection. E352 supports HSPA+ network and the HSPA+ network supports the transfer of up to 21 Mbit/s and 5.76Mbps. Even though in read network situation, the peak speed may not reach, but it would still attractive for most users. And E352 is one of the most popular USB stick all over the world.    

 

Installing the modem, as usual for these devices offered by T-Mobile, is fabulously simple. Drivers are loaded in the modem, so we do not need to use any installation CDs or download anything from the web. Just put the HUAWEI E352 into the USB port, and the installer will start automatically. It is difficult to compatible with the system that the device does not support. The long list includes almost all Windows versions (2000, XP, Vista, 7 - the last two versions of 32 and 64 bit) and Mac OS X.

 

  After installing the modem and let it ready for use. We can use internet and send and receive SMS messages. In our test, the time for connecting to the internet was around three minutes. From the receipt of the package with the modem, we find, the modem brief instructions and warranty.  

 

Huawei E352 is a well-made and well-functioning USB modem, so that you will always have the internet at your fingertips. Those who often travel to the United States - will appreciate the standard of AWS services, which allows easily connect to the Internet through the Great Water. Here now, there are Huawei E369 and E368 USB Stick available, with upgraded firmware and better performance, if you want experience better for surfing, you could check them two on www.4gltemall.com . You will find something amazing.