topblog Ivoire blogs

23/04/2015

Netgear AC790S 4G LTE Cat6 Mobile Hotspot Review

Netgear AC790s LTE hotspot was presented in September 2014 and has since been introduced by Telstra to its product range in Australia. Comparing with other mobile LTE routers, the main difference is the large battery  with touchscreen display and support for LTE-Advanced Cat6. In Europe area, the Netgear AC790s is not yet available, and it is doubtful that we will get the device in near future, because the successor with LTE CAT9 is already waiting in the wings. Actually, the predecessor of AC790s model is the Netgear AC785s, which was very good. Luckily, we have seen the Netgear AC790s closely at MWC.

Netgear AC790s, which was exhibited at the exhibition booth of Netgear, was provided with a small branding by Australian operators Telstra. Till now, Telstra is the only provider with whom the Netgear AC790s is available. But the rest of the devices are no branding and with original Netgear, for example the software. The unit is operated by a large colorful touch screen, although a web interface is still available, but not required for operation. The touch screen is not as fast as you would expect from a smartphone, but for a mobile hotspot, it is sufficient in any case completely.

 

Much more important than the touch screen is the integrated modem in AC790s. This could support LTE (Cat6) with peak download speed up to 300 Mbit/s for the downlink and 50 Mbit/s for uplink. Of course the device is also backward compatible with 3G and 2G along with various data accelerator. The connection to the computer is via WiFi 802.11 ac, ie to 2.4 GHz and 5 GHz. It is possible to enhance the speed and the signal strength with an external antenna(Buy Netgear AC790S antenna from here: http://www.4gltemall.com/4g-antenna-two-ts-9-connector.html ). There are two connectors for the external antenna and they are protected with a sliding mechanism from dust and dirt. On the other side, it’s the power button.

 

 

A very interesting accessories for the Netgear AC790s hotspot is available, the DC112A SmartCradle. It is a docking station that not only strengthen the router signal through USB  and thus charging the battery, but also has other functions. Thus, the wireless signal is amplified and there is a Gigabit LAN port on the back of DC112A. In addition, the mobile radio is improved signal over the external antenna connections.

 

 

 

Les commentaires sont fermés.