topblog Ivoire blogs

28/01/2013

How to Set Up Huawei E392 Wireless Connection

4G LTE modems are more and more popular, when users experience the new technology; they also face the problem about setting the new dongles.  

 

Actually, it's not difficult to set a 4G modem. Today we will have a short introduction of how to set up Huawei E392 4G LTE FDD TDD Surf sticks. Huawei E392 is the most popular 4G LTE dongle all over the world, that's why we choose this modem.

 

 

First step, users must install the software- named Mobile Partner, to PC. For different operators, the version of Mobile partner may vary, but basic functions are the same. If there is already Mobile Partner, it's better to uninstall it and reinstall the new. Of course, I mean the first time you use the 4G modem.  

 

Secondly, after the drivers are installed to PC, it's time to set up the modem. Sometimes, the mobile partner may cannot detect SIM card or detected the SIM card is invalid, you need to switch out the E392 Modem from the PC and pull SIM card out and Re-plug it. Usually, it's due the slow reflection from PC. The 4G software is configured with many new technology of data transmission, when it runs, it may cause the PC system run very slowly.    

 

After the Mobile partner detected Huawei E392 and the SIM. Now click the head column "tools", there is "Options", then you can see there are “General”, Text Message, Profile Management and Network.

 

And then in the Profile Management, you need set below information:  

 

- Profile Name:  4GLTEMALL (It’s just a name, you could write any name you like, default starts automatically)

- APN: Static check

- APN: @@@ (you need to check the APN of your SIM card provider and then enter the right one)

- Access number: * 99 #

- User name: 4GLTEMALLCOM

- Password: 4GLTEMALLCOM (User name and password could write anything you can remember)  

 

Then set this profile as default and Click “OK”.

 

Next step, click Tools-- Network. There are 4 options in the dropdown-LTE only, WCDMA only, GSM only and Auto. If you are using 4G SIM card, you can choose "LTE only", the other 3 options are also usable. But if you are using 3G card, "LTE only" is not workable. Usually, choose "Auto" is good to choose because the modem will switch automatically for users to choose available fastest speed. If the fastest network disconnect, the mobile partner will switch lower lever network and auto connects so that users could keep surfing.

 

After choose the network, click "apply" and "ok", then back to home Manu. Click “Connect” button. You can easily get connected with network and access to surf.  

 

This setting method is also applicable for HUAWEI 4G LTE USB Modem such as E398, E397 etc…So if you are in trouble using your HUAWEI 4G LTE Dongles, you can follow the steps to get 4G networks connected.          

22/01/2013

HUAWEI WiMAX CPE 4G Broadband Routers

2012 is the year of LTE and LTE develops fast all over the world. As the top LTE network solution provider, Huawei has gained many contracts to build fracture in many countries and areas.   

 

Actually, based on its in development and research, Huawei also dominates the WIMAX technology.

 

Since LTE is the mainstream of 4G network, few people concern about WiMAX. Per our information, Huawei has released many WiMAX USB modems and CPE routers. Below are some 4G WiMAX CPEs with specifications, they are in a great family called EchoLife, as a member of HUAWEI EchoLife, they have own special features as follows:

 

HUAWEI BM622 Specifications:


Entrer des mots clefs

* IEEE 802. 16e-2005 WiMAX Air Interface

* 2.5Ghz(Huawei BM622)

* Built-in Smart Antenna Array

* 802.16e Security for Authentication and Ciphering

* Supports MIMO 2R x 2Tx

* Supports WEB UI Configuration Tool

* Qos Management

* Local and Remote Control and SW Upgrade Capabilities

* Device Management Based on TR-069/OMA-DM(Optional)

 

 

HUAWEI BM622i Technical Specification:


Entrer des mots clefs


* IEEE 802.16e-2005 WiMAX Air Interface

* IEEE 802.11b/g/n Wi-Fi Air Interface and support WPS

* Supports 2.3GHz for WiMAX, 2.4GHz for Wi-Fi

* 7 dBi Built-in Smart Antenna Array

* 802.16e Security for Authentication and Ciphering

* Maximum transmission rate of 20 Mbps downlink and 5 Mbps

* QoS Management, Based on classification

* Upgrade and Management, based on Web UI and TR-069/OMA-DM(Optional)

* 1POTS for SIP (RFC3261) VoIP and 1 FE with Advanced IP Networking features

* Supports MIMO

* Supports 2Rx 2Tx

* Supports IP-CS and Ethernet-CS

* Supports Route Mode and Bridge Mode

* Supports WEB UI configuration tool (Bandwidth, Frequency, VoIP, Wi-Fi, Security etc)

 

 

 

Huawei BM625 Feature and Specifications:

Entrer des mots clefs


* WiMAX CPE

* IEEE 802.16e-2005 Wimax Air Interface

* 2.5 GHz (Huawei BM625)

* Built-in Smart Antenna Array

* 802.16e Security for Authentication and Ciphering

* Supports MIMO 2Rx1Tx

* Supports WEB UI Configuration Tool

* Qos Management

* Local and Remote Control and SW Upgrade Capabilities

* Device Management Based on TR-069/OMA-DM(Optional)

* IEEE802.11b/g/n Wifi Access Point

 

 

HUAWEI BM622M Specifications:

Entrer des mots clefs

* IEEE 802. 16e-205 WiMAX Air Interface

* 2.5 GHz (Huawei BM622m)

* Built-in Smart Antenna Array

* 802.16e Security for Authentication and Ciphering

* Supports MIMO 2R x 2Tx

* Supports WEB UI Configuration Tool

* Qos Management

* Local and Remote Control and SW Upgrade Capabilities

* Device Management Based on TR-069/OMA-DM(Optional)

 

 

Huawei BM626e Feature and Specifications:


Entrer des mots clefs

* WiMAX CPE

* IEEE 802.16e-2005 WiMAX Air Interface

* 2.5 GHz (Huawei BM626e)

* Built-in Smart Antenna Array

* 802.16e Security for Authentication and Ciphering

* Supports MIMO 2Rx2Tx

* Supports WEB UI Configuration Tool

* Qos Management

* Local and Remote Control and SW Upgrade Capabilities

* Device Management Based on TR-069/OMA-DM(Optional)

* IEEE802.11b/g/n Wifi Access Point

 

 

Huawei BM632W Specifications:

 

HUAWEI BM632

* WiMAX CPE

 

* IEEE 802.16e-2005 Wimax Air Interface

 

* 3.5 GHz (Huawei BM632w)

 

* Built-in Smart Antenna Array

 

* 802.16e Security for Authentication and Ciphering

 

* Supports MIMO 2Rx2Tx

 

* Supports WEB UI Configuration Tool

 

* Qos Management

 

* Local and Remote Control and SW Upgrade Capabilities

 

* Device Management Based on TR-069/OMA-DM(Optional)

 

* IEEE802.11b/g/n Wifi Access Point

 

 

HUAWEI BM635 Technical Specifications:

 

HUAWEI BM635

* Supporting up to 10 Mbit/s downlink bandwidth and up to 3 Mbit/s uplink bandwidth

* Supporting multiple-input multiple-output (MIMO)

* Supporting orthogonal frequency division multiple access (OFDMA), which increases sp

ectrum utilization

* Providing four RJ45 ports and two RJ11 ports

* Providing a friendly Web UI and abundant help information


* Supporting both local and remote upgrade of the BM635

* Supporting the Voice over IP (VoIP) service based on session initiation protocol (SIP)

* Supporting the voice compression technology

* Providing high quality voice services

* Supporting Internet wireless access


* Guaranteeing network security with reliability* Supporting seamless connection, which enables users to access the network at any time and any place

 

 

 

HUAWEI BM652w Technical Specification:

Entrer des mots clefs

* IEEE 802.16e-2005 WiMAX Air Interface *

* IEEE 802.11b/g/n Wi-Fi Air Interface and support WPS

* Supports 2.3GHz for WiMAX, 2.4GHz for Wi-Fi

* 7 dBi Built-in Smart Antenna Array

* 802.16e Security for Authentication and Ciphering

* Maximum transmission rate of 20 Mbps downlink and 5 Mbps

* QoS Management, Based on classification

* Upgrade and Management, based on Web UI and TR-069/OMA-DM(Optional)

* 1POTS for SIP (RFC3261) VoIP and 1 FE with Advanced IP Networking features

* Supports MIMO

* Supports 2Rx 2Tx

* Supports IP-CS and Ethernet-CS

* Supports Route Mode and Bridge Mode

* Supports WEB UI configuration tool (Bandwidth, Frequency, VoIP, Wi-Fi, Security etc)

 

 

To check more WiMAX USB Modems or CPEs, welcome to land www.4gltemall.com

16/01/2013

What’s the Difference between HUAWEI E5331 and HUAWEI E5332?

Following the mobile WiFi HUAWEI E5331, HUAWEI had released another sister model HUAWEI E5332 HSPA+ 21Mbps mobile WiFi Hotspot. So what’s the difference from the two WiFi hotspots? Huawei-E5331 VS HUAWEI E5332   There is no doubt that HUAWEI E5331 is the best seller in HUAWEI E5 Mobile WiFi family. Based on good performance, cool appearance and good price, HUAWEI E5331 becomes the most popular pocket WiFi since its release from HUAWEI.     HUAWEI E5332 comes out to compensate some functions that HUAWEI E5331 can’t finish. For example, if the users use E5331 in rural area where the network signal strength is weak, the internet link speed may be too slow to bear. At this time, you may think find some ways to enhance the signal. To add an external antenna is the usual way to solute it, however, HUAWEI E5331 don’t have the port for external antenna, then HUAWEI E5332 comes out.   So the main difference between HUAWEI E5332 and E5331 is that HUAWEI 5332 has external connector for antenna, which is to give solution for users living in areas with weak signal. With the connector, HUAWEI E5332 is a little bit thicker than HUAWEI E5331. In this case, it looks like HUAWEI E5151 WLAN Mobile 3G Router.  

But for most users, HUAWEI E5331 is enough because actually, there is built-in antenna in the two mobile WiFi Hotspot. And if you choose HUAWEI E5331, it proves the coverage of network in your area is good enough; users don’t need any more external antenna. And with external antenna port, the cost of HUAWEI E5332 is a little bit expensive than E5331. But you still need spare antenna for HUAWEI E5332, you could buy it from 4gltemall.com .