topblog Ivoire blogs

31/07/2013

ZTE MF28G 4G LTE Router VS ZTE MF28D 4G LTE CPE

As the one of the most important UE device to support 4G LTE networks, 4G Router is on a replaceable position. Many vendors are trying their best to improve the research and development on this field. The Chinese vendor ZTE is also trying to present more telecommunication equipments to share the market.  

 

As we can see, just ZTE 4G Modems, ZTE 4G Routers also looks very similar in appearance. Perhaps they just want to save more budgets, just using one appearance design and change the inner core part to make up a new model. So users usually can't identify which model number of a LTE router, even when they know two model numbers of the router, they don't know what the difference between them is. ZTE MF28G and MF28D are just on the case.

 

 

 

ZTE MF28G and MF28D are the 4G LTE CPE/Router from ZTE, they are for the 4G LTE networks and provide high speed Internet connection.    

 

Appearance  

 

As we said, they are using same appearance design, from the outside, we can't tell from them. There are almost same indicators on the front screen, on the back, there are 4 RJ45 Ethernet cable ports, 2 RJ11 connector for analog telephone and one USB 2.0 interface for host file sharing.  And beside is the plug port for power supply.    

 

Network Frequency Bands    

 

The frequency bands supported should be the key difference between the two 4G Routers. ZTE MF28D router is a FDD-LTE router, which support 4G FDD band 1, band 3, band 7 and band 20 (800/1800/2100/2600MHz). And 3G DC-HSPA+/UMTS networks (900/1200MHz) are backward compatible.    

 

ZTE MF28G LTE CPE is a FDD/TD-LTE dual-mode CPE router. MF28G Router could support FDD band 7 band 20(800/2600MHz), and TD-LTE band 38 & band 40 (2300/2600MHz). Similarly, ZTE MF28G LTE router also could support 3G networks as backup.

   

Connection Speed and User Support   In good network environment, the peak download speed of ZTE MF28D could reach 100Mbps and upload speed to 50Mbps when work on FDD networks. The speed ZTE MF28G varies depending on the network mode. When working on TDD mode, MF28G could allow maximum download speed up to 68Mbps and upload speed up to 17Mbps. However, if working on FDD LTE networks, the downlink could reach 100Mbps and uplink could reach 50Mbps.    

 

Of course, the speeds above for data rate speed are theoretical and can make true only in preface situation. In real life, the speeds may not as faster as expected, but it's still amazing and much faster than 3G speed.

 

 

ZTE MF28G and MF28D could both allow up to 32 users to get connected and surf. So they are good for SOHO, home and small office. The USB interface is help group users to share the files via host Memory.  

 

If you like them, you could buy them from www.4gltemall.com , and before you buy, please confirm the 4G network status and choose the right one. If you need any help, we will be always available here.  

28/07/2013

Difference Between ZTE MF910 and ZTE MF91D 4G LTE Router

Just like ZTE 4G LTE USB modems, ZTE 4G LTE mobile Hotspot looks the same in appearance, but there are some difference between these models. ZTE MF910 and MF91D are two 4G mobile pocket router that looks the same.      

 

Today, we will have a Review of the two similar 4G Pocket WiFi Router. As we know, the ZTE MF91D 4G hotspot has already been presented to public for operators in many countries. It seems ZTE MF910 WiFi hotspot seems not as popular as MF91D right now. But after we review the two MIFIs, you may change this idea.

 

Appearance  

 

As we can see, the two mobile hotspots look very similar, we suppose the manufacturer ZTE use the same design appearance for MF910 and MF91D. There is only one button on the front of device, below the screen. There are WPS button, MicroSD card slot and external antenna connector at the side of the body. And one more USB interface for battery charge.   The SIM card slot is in the inner part of the body, user must open the back cover and remove the battery to insert SIM card.        

 

UE category and Link Speed    

 

ZTE MF910 and MF91D are both LTE category 3 mobile router, as the typical feature of Cat 3, the mobile 4G router could support maximum download speed up to 100Mbps, and the peak download speed could reach 50Mbps.   What's more, the 3G UMTS and 2G GSM/GPRS networks are backward. When working on 3G DC-HSPA+ network, the peak speed could reach 42Mbps. So when user goes to somewhere 4G network is not available, the 4G MiFi could auto switch and work on 3G network in high speed.  

 

 

 

Networks Bands  

 

This should be the core difference between ZTE MF910 an MF91D. Because this decides where they could work and which operator they would support. The ZTE MF91D could support 4G LTE Band 8, Band 3 and Band 7 (900/1800/2600MHz) while ZTE MF91D would support the three bands and Band 20(800MHz). With this specification, they both could roam in most European countries. But in some specific areas, ZTE MF91D may be unable to work on 4g Network. For example, if user uses the MF91D in remote area far from downtown where the 4G band 20 is deployed, it may not connect to 4G and switch to 3G network.    

 

It may not occur on ZTE MF910 because it supports the most popular three LTE bands in Europe areas. So unlock ZTE MF910 could fully replace MF91D. Someone may ask, then why the two models exist simultaneously? It's a good question, usually, the more bands a UE decide could support, the more expensive it is. So ZTE MF91D is in lower price than MF910. And some operator didn't adopt the LTE band 20, it's unnecessary for them to order a device with this band supported.    

 

By the way, almost all the LTE mobile WiFi Hotspot could support up to 10 WiFi users to access Internet and surf, including the ZTE MF910 and MF91D.       In conclusion, ZTE MF910 4G hotspot is more powerful than MF91D, but user could buy budget MF91D per the actual situation. If you want know more 4G mobile hotspots, welcome to land www.4gltemall.com .        

23/07/2013

Difference Between ZTE MF93E and ZTE MF91D 4G LTE Mobile Hotspot Router

Following the commonly deployment of 4G LTE network worldwide, more and more 4G terminals are demanded by the operators. As one of the important vendors, ZTE had gained many business plans from the operators and its wireless gadgets are also very popular. ZTE MF93E and ZTE MF91D 4G LTE mobile hotspot are two models for 4G LTE networks.    

 

Sometimes, most customers may know the model number of the UEs. But they don't know whether the 4G modems or 4G routers would work with the providers in their countries. Today, we will have a review of the two models ZTE MF93E and ZTE MF91D.  

 

 

Network Frequency Band  

 

 

ZTE MF91D 4G Hotspot is earlier available in same countries, it's mainly European 4G networks. MF91D Hotspot supports 4G FDD band 7, band 8 and band 3 (900/1800/2600MHz); they are the most popular three spectrum band in European area. And the 3G UMTS & 2G networks are backward compatible.            

 

ZTE MF93E 4G Mobile Router is a LTE dual-mode (TDD & FDD) WiFi Hotspot. It supports TD-LTE band 3 & band 7 (1800/2600MHz) and FDD bands 38 & band 40 (2300/2600MHz). Based on this specification, MF93E hotspot router is more suitable for the 4G networks in Asia and Middle East areas, such as Hong Kong, Saudi Arabia, Kuwait, China etc.. Just like MF91D, ZTE MF93E dual-mode TDD/FDD hotspot could also works on 3G UMTS 900/2100MHz and 2G GSM/GPRS networks.  

 

 

 

 

Appearance  

 

The appearance of ZTE MF93E and MF91D looks not the same. MF93E is in the design of horizontal, but MF91D is in vertical design. To make the device more user-friendly, the both have only one button in the front. And there is OLED screen to indicate the important information, including network status, operator, WiFi connectors, battery life and data statistics. The batteries in the body are removable and re-chargeable.      

 

 

Link Speed and Connectors Support    

 

ZTE MF91D 4G Pocket Router could reach peak download speed up to 100Mbps and upload speed to 50Mbps on 4G LTE FDD network. It could allow up to 10 users access Internet simultaneous. ZTE MF93E has the same functions like MF91D when it's on FDD mode, however, when working on TD-LTE network, MF93E could support maximum download speed up to 68Mbps and 17Mbps for upload.      

 

Above are the important features of the 4G Pocket WiFi that matters the user experience, if you want to buy unlocked ZTE MF93E or MF91D, welcome to land www.4gltemall.com .