topblog Ivoire blogs

10/06/2019

D-Link Debuts New 5G NR Router DWR-2010

At the Consumer Electronics Show 2019 in Las Vegas, D-Link announced a new 5G NR Enhanced Router named DWR-2010. With nothing more than wall power and a SIM card, the router promises to create a high-speed Wi-Fi network in your home, according to the official sayings, the DWR-2010 5G NR Router enables download speeds more than 40x faster than current average fixed broadband download speed in the U.S. of 70Mbps.

 

 

Based on Qualcomm’s SDX55 chipset, the D-Link DWR-2010 5G Enhanced Gateway is capable of transmitting standards-compliant 5G data through either millimeter wave or sub-6GHz towers, the former currently available in a handful of U.S. cities and the latter planned for wider deployment in 2019 and 2020. Four of its antennas pick up 5G signals, falling back to LTE when 5G’s not available, and the D-link 5G Router also supports voice over LTE (VoLTE) for traditional phone calling.  

 

D-Link DWR-2010 5G Router Highlight features Review:

  • CES Innovation Award Honoree
  • Embedded 5G NR NSA module (3GPP Rel.15)
  • Sub-6 GHz or mmWave frequency compatible
  • AC2600 Dual Band Wi-Fi (800 + 1732 Mbps) with MU-MIMO
  • 4 external antennas for LTE/5G NR
  • Whole home coverage with D-Link Wi-Fi Mesh
  • Auto Firmware Upgrade
  • Supports VoLTE
  • Supports Remote Management (TR-069)

 

 

Like a traditional Wi-Fi router, the 5G NR Router enables users to access data either through Wi-Fi connections or Ethernet ports, starting here with a 2.5Gbps LAN, a 1Gbps WAN/LAN, and three 1Gbps LAN ports. The Wi-Fi 5 (802.11ac) support is practical — given today’s devices — but a generation old, offering an 800Mbps connection on one band plus 1.7 Gbps of bandwidth on another. It’s worth noting that faster Wi-Fi 6 routers are already being announced ahead of this month’s CES trade show, though no consumer devices — computers, tablets, or smartphones — include the chips necessary to use them.

 

 

 

D-Link’s key selling point for the DWR-2010 5G is convenience. Assuming there’s a 5G network in your neighborhood, and 5G data pricing is reasonable, a cellular carrier could offer you high-speed home broadband service with zero installation hassle — just plug the router into a wall near a window and, if the SIM card’s pre-installed, join the network. In theory, the router could work with current and future AT&T and Verizon 5G services, and D-Link expects it will expand broadband availability to “remote areas currently limited to dial-up and DSL services.”  

 

A secondary selling point for the router is speed. The DWR-2010 5G Gateway’s bandwidth promises to stream 4K video content with ease and to support “little to zero lag” in online gaming. This sort of reduced latency is a key feature of 5G networks and is expected to enable both ultra-high resolution videos and instantly responsive immersive 3D/VR streaming.

 

 

 

The DWR-2010 5G NR Router is scheduled for release in the second half of 2019 and doesn’t yet have a price tag. By the time it’s released, multiple carriers will hopefully have affordable 5G data plans capable of making the most of its features.

Telstra Presents Netgear Nighthawk M2 5G Mobile WiFi Router

As the successor to the Nighthawk M1, Netgear presented a new 5G mobile router Nighthawk M2 for the Australian network carrier Telstra at CES 2019. The new mobile hotspot supports 4G LTE Category 20 and could provide faster speeds for surfing. The appearance of the new 5G mobile hotspot is very similar to the first 5G mobile router Netgear Nighthawk M5, which is available for the AT&T 5G networks in the USA.

 

 

The Nighthawk M2 is equipped with a Qualcomm Snapdragon X24 modem, and the theoretical data rates are 2Gbps for download and 316Mbps for upload. It’s possible to achieve 7 carrier aggregations for download and triple carrier aggregation for upload. The 4 × 4 MIMO antenna technology is supported on up to 5 carriers simultaneously. The 256QAM modulation is supported not only in the downlink but also in the uplink. Combining the mentioned technologies, the device reaches the mentioned 2 gigabits per second - but only if the mobile networks support these technologies as well.

 

 

Like the predecessor M1, Netgear M2 could also support maximum up to 20 wireless devices to access the internet. What’s more, the Nighthawk M2 has one RJ45 Ethernet port, one USB-C Port and one Type-A USB port. And two connectors for external antennas are available, but what’s the connector type is unknown yet. More details of the Netgear Nighthawk M2 is waiting for the official specs from Netgear or Telstra.  

 

According to the Telstra news, the Nighthawk M2 is the world’s fastest 4G device on Australia’s fastest mobile network, and it’s said the M2 was already under test and it would be available in the market in early 2019. However, the price of Netgear Nighthawk M2 is not yet known, but we will keep updating the news.